What is advantech plywood?

Is AdvanTech better than OSB?

AdvanTech is specially engineered so that the layers create a “woven matrix of fibers.” This process makes the product stable throughout, which means it is less prone to squeaking. And its dense composition means nails/fasteners hold better than they do with plywood or OSB.

Is AdvanTech plywood waterproof?

While AdvanTech subflooring is engineered to withstand extensive water exposure with a 500-day No Sanding Guarantee,¹ you can take extra measures to protect your material if prolonged frozen, wet or dry cycles are anticipated when the wall framing isn’t up yet.

What is the difference between AdvanTech and OSB?

Two things really distinguish how AdvanTech panels are made that contribute to their high performance over commodity OSB: resin technology and manufacturing precision. AdvanTech panels use an advanced liquid resin that coats flakes during the manufacturing process to make sure the panel is thoroughly protected.

Is AdvanTech sheathing tongue and groove?

It has tongue and groove edges.

What is best subfloor material?

Plywood has been a standard subfloor material since the 1950s and remains the preferred subflooring for many builders. Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring.

Whats stronger OSB or plywood?

Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists. However, nail-holding ability controls performance in shear wall applications.

How long does AdvanTech last?

In fact, AdvanTech has a 50 year limited warranty. You’ll end up with flatter, smoother finished floors and eliminate the potential for costly delaminations in your subfloor. The photo shows our home during construction with the AdvanTech sheathing (flooring) completely soaked by 10 days of rain.

How long can AdvanTech stay wet?

AdvanTech subflooring is engineered to withstand water exposure with a 500-day no sanding guarantee.

Can AdvanTech be sanded?

With an industry-leading warranty and unmatched 500-day no-sanding guarantee, AdvanTech flooring is the flooring panel that more builders trust. It’s engineered for superior strength, moisture resistance and quality so you can build the quiet, stiff floor your homeowners demand.

Can AdvanTech be used as shed floor?

Plywood and OSB products that are commonly used on storage sheds would meet this PS-2 standard. AdvanTech flooring was issued the Evaluation Service Report, ESR-1785, certifying that it has endured a battery of testing protocols that measure and ensure greater and consistent levels of panel strength, and stiffness.

What is AdvanTech used for?


AdvanTech® sheathing is a high-performance engineered panel designed to replace plywood and commodity oriented strand board (OSB) for roof, wall, and 2-layer floating subfloor system applications.

What thickness subfloor is recommended?

The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch.

Is AdvanTech fire rated?

AdvanTech flooring and sheathing panels are recognized as having a Class C (III) flame spread rating without need for test or label by HUD/ FHA Manual of Acceptance Practices, Section 405-8 to the Minimum Property Standards.

Can you paint AdvanTech flooring?

Apply your oil based primer/paint, polyurethane or epoxy coating directly to the AdvanTech following the manufacturer’s recommendations for application. Be careful in choosing a coating for the AdvanTech because it may interfere with finish floor covering installation and performance.

How thick is AdvanTech flooring?

Only 23/32″ thickness AdvanTech® subflooring and 1/2″ and 5/8″ thicknesses of AdvanTech® roof and wall sheathing are included in ICC-ES report ESR-1785. Estimated panel weight. Actual weight may vary by mill. Limitations and restrictions apply.

What is the best wood for subfloor?

Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

What are 3 common subfloor materials?

Common Subfloor Materials. There are four primary materials used as subfloor: plywood, oriented strand board (OSB), concrete, and high-performance panels. There are other subfloors materials out there, but they are used in more niche situations. The construction industry is constantly evolving.

What is the cheapest subfloor?

Rarely, a prospective homeowner may recognize that OSB is the cheaper subfloor material.

What is CDX plywood?

What is CDX? CDX is veneer plywood, which is manufactured by gluing and pressing together sheets of wood. The letters C and D represent the grades of either side of the plywood, while X stands for exposure.

What is the strongest type of plywood?

The answer is marine plywood. It is the strongest and toughest of all plywood on the market. High-quality glues hold the plies in marine plywood together. That makes them structurally sound and resistant to moisture.

What is the difference between CDX and OSB?

This engineering wood is made of real wood. But it is not solid wood. Both OSB and CDX are engineering wood products.

Difference between OSB and CDX.

Water-Resistant OSB performs better in moisture. It does not perform well in moisture.

Is it OK for subfloor to get wet during construction?

Most of the time, however, a little rain and snow will not damage the subfloor. If at all possible, you should ensure that the subfloor is at least swept off after a rain or snow storm to help prevent damage to the subfloor. You may even want to use a wet-vac to remove as much of the water as possible.

Where is Advantech made?

Advantech complements its design strengths with three world-class production centers in China and Taiwan that are fully capable of meeting all your manufacturing needs.

Why is subfloor wet?

Flooring cupping or buckling occurs and a subfloor moisture problem worsens when there is impermeable flooring like vinyl, laminate, or a typical polyurethane finish on wood. When the floor finish is impermeable, moisture can’t get through it, so the subfloor just gets wetter and wetter all summer.

How do I keep my construction subfloor dry?

Wet Framing? Don’t Panic, Watch this. – YouTube

How do I protect my subfloor?

What steps should you take to prevent subfloor moisture?

  1. Take proper measurements before, during, and after installation of the moisture level. …
  2. Add a flooring underlayment with a vapor retarder barrier, also known as a moisture barrier. …
  3. Make sure that your contractors don’t penetrate the vapor barrier.

How long can OSB subfloor be exposed to weather?

OSB 3 is classified as resistant to humid conditions. This is a liability choice to avoid misunderstandings. We have had OSB 3, also in horizontal orientation, exposed to rain for at least 4 months. Even puddles were forming and deliberately ignored by us.

Who makes AdvanTech flooring?

Huber Engineered Woods LLC creates innovative specialty products—AdvanTech® subflooring and subfloor adhesive and ZIP System® roof and wall sheathing—that provide residential and commercial builders with improved performance, easy installation and overall peace of mind.

Is plywood better than OSB for subfloor?

This evolved plywood may claim an overall advantage over OSB, since plywood is a stiffer, longer-lasting subfloor option. It will also hold up better under flooring accidents like leaks or flooding, and has greater nail withdrawal strength to hold the nail in under stress.

What thickness is 23 32 plywood?


1/4-inch 11/32
1/2-inch 15/32
5/8-inch 19/32
3/4-inch 23/32

Where is AdvanTech plywood manufactured?

Advantech complements its design strengths with three world-class production centers in China and Taiwan that are fully capable of meeting all your manufacturing needs.

Is it better to nail or screw subfloor?

Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails, smooth nails may withdraw easier, leading to squeaks.

What is 3/4 plywood called?

Common Plywood Dimensions

Nominal Thickness Actual Thickness
1/2 15/32
5/8 19/32
3/4 23/32
1-1/8 1-1/8

What is underneath a subfloor?


The underlayment material is installed below the floor covering and placed on top of a subfloor. Under the visible covering, there is a layer made of soft or foam-like materials with a thickness of between 1/4 – 1/2-inch.

Is AdvanTech exterior rated?

AdvanTech sheathing is an Exposure 1 rated panel, and should not be used in permanent exterior applications. AdvanTech sheathing panels are offered in three thicknesses (1/2″, 5/8″, 23/32″) for a wide range of conditions.

Can you use AdvanTech for roofing?

AdvanTech flooring can be used as roof sheathing. Roof applications are generally designed using more liberal deflection criteria than floors (i.e., L/240 deflection criteria for roof live loads vs. L/360 or tighter deflection criteria for residential floor live loads).

What’s the difference between sheathing and plywood?

Plywood sheathing (OSB or plywood) is often mistaken for plywood underlayment. They are not the same. Plywood sheathing is most often used to construct the structural sub-floor. Plywood sheathing can either be OSB or all plywood.

Does AdvanTech have Formaldehyde?

The adhesives used to produce AdvanTech and ZIP System panels are a combination of exterior type phenol formaldehyde (PF) and isocyanate resins.

How do you install AdvanTech flooring?

AdvanTech Flooring – How to Install – Glenbrook U – YouTube

How many sheets of AdvanTech are in a lift?

I believe there are roughly 48 sheets in a lift of 1/2″, depending on manufacture can be as much as 52, and one supplier does units of 75.